RESUMO Objetivo: mensurar o tempo total da mastigação e da fase oral da deglutição em idosos saudáveis, considerando diferentes consistências alimentares, a presença de dentes naturais e o tipo de reabilitação oral protética, bem como realizar comparação entre as condições dentárias e as consistências. Métodos: estudo transversal com 57 idosos saudáveis, entre 60 e 82 anos, distribuídos em grupo dentado (D) (n=15) e grupos reabilitados: próteses parciais fixas ou removíveis em uma ou ambas as arcadas (PP) (n=15); prótese total removível maxilar e mandibular (PTR) (n=15); prótese total - prótese removível superior e prótese implanto-suportada inferior (PTIS) (n=12). O tempo de duração (segundos) da mastigação e da fase oral da deglutição foi medido nas consistências: sólida (pão francês), pudim (10 ml) e líquida (10 ml). Resultados: idosos dentados saudáveis apresentaram os intervalos: líquido=1,07±0,35 s; pudim=3,48±1,76 s; e sólido=27,88±7,11 s. Foram observadas diferenças estatisticamente significativas entre os grupos D e PTIS (p=0,0056) e entre D e PTR (p=0,0056) para líquido. Para todos os grupos, houve aumento estatisticamente significante entre as consistências líquida e sólida e entre pastosa e sólida (p<0,001). Conclusões: idosos dentados apresentaram menor tempo de fase oral da deglutição para líquidos do que idosos edêntulos totais reabilitados, mas não diferente dos idosos com prótese parcial. O tempo de mastigação e deglutição do alimento sólido foi maior que o das demais consistências, independente da condição dentária.

ABSTRACT Purpose: to measure the total time of mastication and oral phase of swallowing in healthy elderly people, considering different food consistency, the presence of natural teeth, and the type of prosthetic oral rehabilitation, as well to compare dental conditions and consistencies. Methods: a cross-sectional study with 57 healthy elderly people, aged between 60 and 82 years, divided into: dentate group (D) (n=15); and rehabilitated groups; PD: fixed or removable partial dentures in one or both arches (n=15); CRD: maxillary and mandibular complete removable dentures (n=15); ISCD: complete dentures - maxillary removable denture and mandibular implant-supported dentures (n=12). The duration time (seconds) of chewing and of the oral phase of swallowing was measured in the consistencies: solid (a roll slice), pudding (10 ml) and liquid (10 ml). Results: healthy dentate elderly subjects had the following intervals: liquid=1.07±0.35 s; pudding=3.48±1.76 s; and solid=27.88±7.11 s. Statistically significant differences were observed between the D and ISCD groups (p=0.0056) and between D and CRD (p=0.0056) for liquid. For all groups, there was a statistically significant increase between liquid and solid consistencies and between pasty and solid ones (p<0.001). Conclusions: the dentate elderly had shorter oral phase time of swallowing for liquids than the rehabilitated edentulous elderly, but not different from the elderly with partial dentures. Chewing and swallowing time for solid food was longer than that for the other consistencies, regardless of dental condition.

Abstract Objective Since the transmittance of ceramics can influence the degree of conversion (DC) of resin cements, ceramics composition and shade should be considered in the selection of resin cement. This in vitro study aimed to evaluate the effect of the transmittance of different composition, opacities and shades of ceramics on the degree of conversion of two dual-cured resin cements. Methodology Sixty discs were prepared from low translucency (LT) and medium opacity (MO) lithium disilicate ceramic, and zirconia ceramic (Z). Each group was subdivided into 5 subgroups (n=4) in shades A2, A3.5, B2, C2 and D3. The transmittance measurement was performed in a spectrophotometer. The Variolink II and Rely X U200 resin cements were photoactivated by LED (1400 mW/cm2) for 40 s through the ceramic discs and without the discs (control group). The DC was measured with infrared FTIR spectroscopy, immediately after light activation. Data were analyzed with Kruskall-Wallis and one-way ANOVA, following post-hoc comparisons by Tukey test and Pearson’s correlation test (P<0.05). Results LT ceramic exhibited higher transmittance values compared to MO and Z ceramics. LTA2 and LTB2 showed statistically higher transmittance values compared to MOA2, MOA3.5 and ZA3.5. For Variolink II, the ceramic interposition did not influence the DC, since there were no statistical differences between groups with ceramic interposition and the control group. For Rely X U200 cement, the interposition of some ceramics types/shades (LTA3.5, MOA2, MOA3.5 and ZA3.5) significantly decreased the DC values compared to control group. A positive correlation was found between the ceramic transmittance and DC values of both tested cements. Conclusions. The transmittance and DC values of the cements were influenced by composition and shades of the ceramics. The higher the transmittance of ceramics, the higher the DC values for both cements.

Abstract Due to increasing of aesthetic demand, ceramic crowns are widely used in different situations. However, to obtain long-term prognosis of restorations, a good conversion of resin cement is necessary. Objective: To evaluate the degree of conversion (DC) of one light-cure and two dual-cure resin cements under a simulated clinical cementation of ceramic crowns. Material and Methods: Prepared teeth were randomly split according to the ceramic's material, resin cement and curing protocol. The crowns were cemented as per manufacturer's directions and photoactivated either from occlusal suface only for 60 s; or from the buccal, occlusal and lingual surfaces, with an exposure time of 20 s on each aspect. After cementation, the specimens were stored in deionized water at 37°C for 7 days. Specimens were transversally sectioned from occlusal to cervical surfaces and the DC was determined along the cement line with three measurements taken and averaged from the buccal, lingual and approximal aspects using micro-Raman spectroscopy (Alpha 300R/WITec®). Data were analyzed by 3-way ANOVA and Tukey test at =5%. Results: Statistical analysis showed significant differences among cements, curing protocols and ceramic type (p<0.001). The curing protocol 3x20 resulted in higher DC for all tested conditions; lower DC was observed for Zr ceramic crowns; Duolink resin cement culminated in higher DC regardless ceramic composition and curing protocol. Conclusion: The DC of resin cement layers was dependent on the curing protocol and type of ceramic.

Composite resin and metallic posts are the materials most employed for reconstruction of teeth presenting partial or total destruction of crowns. Resin-based cements have been widely used for cementation of ceramic crowns. The success of cementation depends on the achievement of adequate cement curing. Objectives: To evaluate the microhardness of Variolink® II (Ivoclar Vivadent, Schaan, Liechtenstein), used for cementing ceramic crowns onto three different coronal substrate preparations (dentin, metal, and composite resin), after 7 days and 3 months of water storage. The evaluation was performed along the cement line in the cervical, medium and occlusal thirds on the buccal and lingual aspects, and on the occlusal surface. Material and Methods: Thirty molars were distributed in three groups (N=10) according to the type of coronal substrate: Group D- the prepared surfaces were kept in dentin; Groups M (metal) and R (resin)- the crowns were sectioned at the level of the cementoenamel junction and restored with metallic cast posts or resin build-up cores, respectively. The crowns were fabricated in ceramic IPS e.max® Press (Ivoclar Vivadent, Schaan, Liechtenstein) and luted with Variolink II. After 7 days of water storage, 5 specimens of each group were sectioned in buccolingual direction for microhardness measurements. The other specimens (N=5) were kept stored in deionized water at 37ºC for three months, followed by sectioning and microhardness measurements. Results: Data were first analyzed by three-way ANOVA that did not reveal significant differences between thirds and occlusal surface (p=0.231). Two-way ANOVA showed significant effect of substrates (p<0.001) and the Tukey test revealed that microhardness was significantly lower when crowns were cemented on resin cores and tested after 7 days of water storage (p=0.007). Conclusion: The type of material employed for coronal reconstruction of preparations for prosthetic purposes may influence the cement properties.

OBJECTIVES: To determine the micro-hardness profile of two dual cure resin cements (RelyX - U100®, 3M-eSPe and Panavia F 2.0®, Kuraray) used for cementing fiberreinforced resin posts (Fibrekor® - Jeneric Pentron) under three different curing protocols and two water storage times. MATERIAL AND METHODS: Sixty 16mm long bovine incisor roots were endodontically treated and prepared for cementation of the Fibrekor posts. The cements were mixed as instructed, dispensed in the canal, the posts were seated and the curing performed as follows: a) no light activation; b) light-activation immediately after seating the post, and; c) light-activation delayed 5 minutes after seating the post. The teeth were stored in water and retrieved for analysis after 7 days and 3 months. The roots were longitudinally sectioned and the microhardness was determined at the cervical, middle and apical regions along the cement line. The data was analyzed by the three-way ANOVA test (curing mode, storage time and thirds) for each cement. The Tukey test was used for the post-hoc analysis. RESULTS: Light-activation resulted in a significant increase in the microhardness. This was more evident for the cervical region and for the Panavia cement. Storage in water for 3 months caused a reduction of the micro-hardness for both cements. The U100 cement showed less variation in the micro-hardness regardless of the curing protocol and storage time. CONCLUSIONS: The micro-hardness of the cements was affected by the curing and storage variables and were material-dependent.

O autismo está associado a epilepsia em aproximadamente 30% dos casos com evidências sugerindo a mesma neurofisiopatologia. O mecanismo comum em ambas doenças ainda não está bem definido e a heterogeneidade dos sintomas clínicos nas crianças com transtorno do espectro autista e epilepsia reforça a importância de uma abordagem que inclui a investigação de etiologias biológicas através de estudos de neuroimagem, dos processos inflamatórios, de genética e neuroquímica. Aqui, iremos revisar os principais aspectos da associação entre autismo e epilepsia.

Autism is associated with epilepsy in early childhood in almost 30% of children with either disorder, with evidence suggesting the same neurophysiopathology. The common mechanism in both diseases is not well defined and the heterogeneity of clinical symptoms in children with autism spectrum disorder (ASD) and epilepsy highlights the importance of a comprehensive assessment that includes investigation of underlying biological etiologies through neuroimaging, inflammatory, genetic and neurochemistry studies. Here, we review the main aspects of this association between autism and epilepsy.

Hypodontia is the congenital absence of one or more teeth and may affect permanent teeth. Several options are indicated to treat hypodontia, including the maintenance of primary teeth or space redistribution for restorative treatment with partial adhesive bridges, tooth transplantation, and implants. However, a multidisciplinary approach is the most important requirement for the ideal treatment of hypodontia. This paper describes a multidisciplinary treatment plan for congenitally missing permanent mandibular second premolars involving orthodontics, implantology and prosthodontic specialties.

OBJECTIVES: To evaluate the effect of a chewing exercise on pain intensity and pressure-pain threshold in patients with myofascial pain. METHODS: Twenty-nine consecutive women diagnosed with myofascial pain (MFP) according to the Research Diagnostic Criteria comprised the experimental group and 15 healthy age-matched female were used as controls. Subjects were asked to chew a gum stick for 9 min and to stay at rest for another 9 min afterwards. Pain intensity was rated on a visual analog scale (VAS) every 3 min. At 0, 9 and 18 min, the pressure-pain threshold (PPT) was measured bilaterally on the masseter and the anterior, medium, and posterior temporalis muscles. RESULTS: Patients with myofascial pain reported increase (76%) and no change (24%) on the pain intensity measured with the VAS. A reduction of the PPT at all muscular sites after the exercise and a non-significant recovery after rest were also observed. CONCLUSION: The following conclusions can be drawn: 1. there are at least two subtypes of patients with myofascial pain that respond differently to experimental chewing; 2. the chewing protocol had an adequate discriminative ability in distinguishing patients with myofascial pain from healthy controls.

TEMA: a produção da fala nas modalidades de reabilitação oral protética. OBJETIVO: verificar se o tipo de reabilitação oral interfere na produção da fala. MÉTODO: 36 idosos (média = 68 anos), divididos em 3 grupos, foram avaliados: 13 com dentes naturais (A), 13 com prótese total mucosossuportada superior e inferior (B) e 10 com prótese total mucosossuportada superior e implantossuportada inferior (C). A estabilidade das próteses foi avaliada por um dentista e amostras de fala foram analisadas por 5 fonoaudiólogos. Para determinar a freqüência de alteração dos sons da fala utilizou-se o cálculo da Porcentagem de Consoantes Corretas (PCC). RESULTADOS: observou-se poucos casos com alteração de fala, com maior freqüência no grupo C (23,08%), sendo a articulação travada presente em todos os grupos, a redução dos movimentos labiais em dois grupos (A e B) e a articulação exagerada e a falta de controle salivar em um dos grupos (C e B). Quanto à PCC, menor valor foi observado para os fones linguodentais nos grupos B e C (maior ocorrência de alteração), seguido dos fones alveolares, predominando casos sem alteração no grupo A, contrariamente aos demais grupos, sendo a projeção lingual e o ceceio as alterações mais encontradas. Não houve diferença entre os grupos e a maioria do grupo B estava com a prótese inferior insatisfatória, não havendo associação entre alteração de fala e prótese insatisfatória. CONCLUSÃO: apesar da amostra pequena, indivíduos reabilitados com prótese total apresentam alteração nos fones linguodentais e alveolares e o tipo de prótese, bem como a estabilidade desta parece não interferir na produção da fala.

BACKGROUND: speech production in different modalities of oral prosthetic rehabilitation. AIM: to study the speech production of subjects submitted to different oral rehabilitation modalities. METHOD: 36 elderly individuals (average = 68 years) of both gender were evaluated. Participants were divided in three groups: 13 subjects with natural teeth (A); 13 edentate using maxillary and mandibular conventional dentures (B); and 10 edentate using maxillary conventional dentures and mandibular implant-supported prosthesis (C). Prosthesis stability was evaluated by a dentist and speech samples were analyzed by five speech-language pathologists. In order to determine the frequency of speech sound alterations, the Percentage of Correct Consonants (PCC) was used. RESULTS: few individuals presented speech alterations. Group C presented a higher occurrence of speech alterations (23.08%). Locked articulation was present in all groups; the reduction in lip movement was observed for groups A and B; exaggerated articulation and absence of saliva control was observed for group C. A smaller Percentage of Correct Consonants value was observed for the linguodental phonemes, in groups B and C, followed by the alveolar phonemes. Group A presented the majority of individuals with no speech alterations. On the other hand, for groups B and C, lisp and tongue projection was frequently observed. No statistical difference was found between the groups. Most of the individuals in group B presented unsatisfactory prosthesis stability, but no association was identified between speech alterations and prosthesis stability. CONCLUSION: despite the small sample, the results of the study suggest that individuals using dentures present alterations in linguodental and alveolar phonemes. The type of prosthesis and its stability do not seem to interfere in speech production.

The wear resistance of denture teeth is important to the longevity of removable prostheses of edentulous patients. The ability of denture teeth to maintain a stable occlusal relationship over time may be influenced by this property. The purpose of this in vitro study was to evaluate the wear resistance of polymethyl methacrylate (PMMA) denture teeth based on their chemical composition when opposed by a ceramic antagonist. The maxillary canines (n=10) of 3 PMMA denture teeth (Trubyte Biotone, cross-linked PMMA; Trilux, highly cross-linked IPN (interpenetrating polymer network)-PMMA; and Vivodent, highly cross-linked PMMA) were secured in an in vitro 2-body wear-testing apparatus that produced sliding contact of the specimens (4.5 cycles/s, sliding distance of 20 mm, under 37°C running water) against glazed or airborne particle abraded ceramic. Wear resistance was measured as height loss (mm) under 300 g (sliding force) after 100,000 cycles, using a digital measuring microscope. Mean values were analyzed by 2-way ANOVA and Tukey's test (a=0.05). The wear of Trubyte Biotone (0.93 ± 0.14 mm) was significantly higher than that of both other types of teeth tested against abraded ceramic (p<0.05). The Vivodent tooth (0.64 ± 0.17 mm) exhibited the best wear resistance among the denture teeth tested against airborne particle abraded ceramic. There were no statistically significant differences (p>0.05) in wear among the 3 denture teeth evaluated against glazed ceramic. Trilux and Vivodent teeth tested against either glazed or airborne particle abraded ceramic did not differ significantly from each other (p<0.05). All teeth showed significantly more wear against airborne particle abraded ceramic than against glazed ceramic (p<0.05). In conclusion, the three types of PMMA denture teeth presented significantly different wear resistance against the abraded ceramic. The high-strength PMMA denture teeth were more wear-resistant than the conventional PMMA denture tooth.

Microleakage can be related to margin misfit. Also, traditional microleakage techniques are time-consuming. This study evaluated the existence of correlation between in vitro margin fit and a new microleakage technique for complete crowns cemented with 3 different luting agents. Thirty human premolars were prepared for full-coverage crowns with a convergence angle of 6 degrees, chamfer margin of 1.2 mm circumferentially, and occlusal reduction of 1.5 mm. Ni-Cr cast crowns were cemented with either zinc phosphate (ZP) (S.S. White), resin-modified glass-ionomer (RMGI) (Rely X Luting Cement) or a resin-based luting agent (RC) (Enforce). Margin fit (seating discrepancy and margin gap) was evaluated according to criteria in the literature under microscope with 0.001 mm accuracy. After thermal cycling, crowns were longitudinally sectioned and microleakage scores at tooth-cement interface were obtained and recorded at ×100 magnification. Margin fit parameters were compared with the one-way ANOVA test and microleakage scores with Kruskal-Wallis and Dunn's tests (alpha=0.05). Correlation between margin fit and microleakage was analyzed with the Spearman's test (alpha=0.05). Seating discrepancy and marginal gap values ranged from 81.82 µm to 137.22 µm (p=0.117), and from 75.42 µm to 78.49 µm (p=0.940), respectively. Marginal microleakage scores were ZP=3.02, RMGI=0.35 and RC=0.12 (p<0.001), with no differences between RMGI and RC scores. The correlation coefficient values ranged from -0.27 to 0.30 (p>0.05). Conclusion: Margin fit parameters and microleakage showed no strong correlations; cast crowns cemented with RMGI and RC had lower microleakage scores than ZP cement.

Este estudo avaliou a resistência à fratura de raízes fragilizadas restauradas com pinos de fibra de vidro, núcleos de resina composta e coroas totais metálicas. Trinta caninos superiores foram aleatoriamente divididos em 3 grupos. Dentes sem enfraquecimento (grupo controle); grupo de raízes parcialmente enfraquecidas e amplamente enfraquecidas. O grupo controle foi restaurado com pinos de fibra de vidro e núcleo em resina composta. Os dentes dos grupos de raízes parcialmente e amplamente enfraquecidas foram internamente preparadas de maneira padronizada simulando enfraquecimento. Após isto, as raízes foram parcialmente preenchidas com resina composta e restauradas como no grupo controle. Os espécimes foram expostos a 250.000 ciclos em uma máquina de ciclagem mecânica. Todos os dentes intactos foram submetidos à carga estática (N) em uma máquina de ensaio universal a 45 graus ao longo eixo do dente até a sua falha. Os resultados foram analisados através do teste ANOVA a 1 critério e teste de Dunnett para comparações múltiplas (p=0,05). A análise estatística revelou diferenças significantes (p<0,01) entre os três grupos (grupo controle = 566,73 N; RPE = 409,64 N; e ERA = 410,91 N). Quando as três médias de resistência a fratura são ranqueadas as duas menores não se diferem. Os resultados deste estudo mostraram que uma maior espessura de paredes dentinárias aumenta significantemente a resistência à fratura de dentes tratados endodonticamente.

This study evaluated the fracture resistance of weakened roots restored with glass fiber posts, composite resin cores and complete metal crowns. Thirty maxillary canines were randomly divided into 3 groups of 10 teeth each: teeth without weakened roots (control); teeth with partially weakened roots (PWR) and teeth with and largely weakened roots (LWR). The control group was restored with glass fiber posts and a composite resin core. Teeth in the PWR and LWR groups were flared internally to standardized dimensions in order to simulate root weakness. Thereafter, the roots were partially filled with composite resin and restored in the same way as in the control group. The specimens were exposed to 250,000 cycles in a controlled chewing simulator. All intact specimens were subjected to a static load (N) in a universal testing machine at 45 degrees to the long axis of the tooth until failure. Data were analyzed by one-way ANOVA and Dunnett's test for multiple comparisons (p=0.05). There were statistically significant difference differences (p<0.01) among the groups (control group = 566.73 N; PWR = 409.64 N; and LWR = 410.91 N), with significantly higher fracture strength for the control group. There was no statistically significant difference (p>0.05) between the weakened groups. The results of this study showed that thicker root dentin walls significantly increase the fracture resistance of endodontically treated teeth.

A seleção adequada do agente cimentante é essencial para evitar falhas por perda de retenção em coroas retidas por núcleos. O objetivo deste estudo foi investigar a resistência à tração e o tipo de falha de pinos de fibra de vidro cimentados com diferentes materiais. Cimentaram-se pinos de fibra de vidro em 40 pré-molares inferiores, divididos em 4 grupos (n = 10): Grupo 1 - ionômero de vidro modificado por resina RelyX Luting; Grupo 2 - ionômero de vidro modificado por resina Fuji Plus; Grupo 3 - cimento resinoso RelyX ARC; Grupo 4 - cimento resinoso Enforce. Avaliaram-se os espécimes por teste de resistência à tração e análise por microscopia óptica para observação do tipo de falha. Compararam-se os valores de resistência à tração de cada grupo por análise de variância e teste de Tukey, sendo que o nível de significância estabelecido foi de 5%. Descreveram-se os tipos de falha na forma de porcentagens. Os valores de resistência à tração obtidos foram: Grupo 1 - 247,6 N; Grupo 2 - 256,7 N; Grupo 3 - 502,1 N; Grupo 4 - 477,3 N. Não houve diferença estatisticamente significativa entre os Grupos 1 e 2 ou entre os Grupos 3 e 4, porém os cimentos resinosos apresentaram valores de resistência à tração significativamente maiores do que os apresentados pelos cimentos ionoméricos. O Grupo 1 exibiu 70% de falhas coesivas, enquanto os Grupos 2, 3 e 4 apresentaram 70% a 80% de falhas adesivas na interface dentina-cimento. Concluiu-se que os cimentos resinosos e ionoméricos são capazes de proporcionar retenção clinicamente suficiente de pinos de fibras de vidro, e que os cimentos ionoméricos podem ser indicados principalmente quando houver dificuldades de aplicar técnicas adesivas.

Proper selection of the luting agent is fundamental to avoid failure due to lack of retention in post-retained crowns. The objective of this study was to investigate the tensile bond strength and failure mode of glass fiber posts luted with different cements. Glass fiber posts were luted in 40 mandibular premolars, divided into 4 groups (n = 10): Group 1 - resin-modified glass ionomer RelyX Luting; Group 2 - resin-modified glass ionomer Fuji Plus; Group 3 - resin cement RelyX ARC; Group 4 - resin cement Enforce. Specimens were assessed by tensile strength testing and light microscopy analysis for observation of failure mode. The tensile bond strength values of each group were compared by ANOVA and Tukey test. The significance level was set at 5%. The failure modes were described as percentages. The following tensile strength values were obtained: Group 1 - 247.6 N; Group 2 - 256.7 N; Group 3 - 502.1 N; Group 4 - 477.3 N. There was no statistically significant difference between Groups 1 and 2 or between Groups 3 and 4, yet the resin cements presented significantly higher tensile bond strength values than those presented by the glass ionomer cements. Group 1 displayed 70% of cohesive failures, whereas Groups 2, 3 and 4 exhibited 70% to 80% of adhesive failures at the dentin-cement interface. We concluded that resin cements and glass ionomer cements are able to provide clinically sufficient retention of glass fiber posts, and that glass ionomer cements may be especially indicated when the application of adhesive techniques is difficult.

OBJECTIVE: This study evaluated the fracture strengths of endodontically treated teeth restored with prefabricated posts with different post lengths. MATERIAL AND METHODS: Thirty freshly extracted canines were endodontically treated. They were randomly divided into groups of 10 teeth and prepared according to 3 experimental protocols, as follows; Group 1/3 PP: teeth restored with prefabricated post and composite resin core (Z250) with post length of 5.0mm; Group 1/2 PP and Group 2/3 PP: teeth restored with prefabricated post and composite resin core (Z250) with different combinations of post length of 7.5mm and 10mm, respectively. All teeth were restored with full metal crowns. The fracture resistance (N) was measured in a universal testing machine (crosshead speed 0.5mm/min) at 45 degrees to the tooth long axis until failure. Data were analyzed by one-way analysis of variance (alpha=.05). RESULTS: The one-way analysis of variance demonstrated no significant difference among the different post lengths (P>.05) (Groups 1/3 PP = 405.4 N, 1/2 PP = 395.6 N, 2/3 PP = 393.8 N). Failures occurred mainly due to core fracture. CONCLUSIONS: The results of this study showed that an increased post length in teeth restored with prefabricated posts did not significantly increase the fracture resistance of endodontically treated teeth.

Muitos profissionais utilizam restaurações metalocerâmicas sem atentarem para as características de compatibilidade entre metal e cerâmica, fator muito importante para o sucesso deste tipo de restauração. Este estudo avaliou a resistência de união entre uma liga de paládio-prata (Pors-on 4) e 3 cerâmicas (Ceramco, Noritake e Vita VMK-68) aplicando-se forças de cisalhamento na interface metal/porcelana. Uma matriz especialmente desenvolvida serviu para a confecção dos corpos-de-prova e realização dos testes de cisalhamento. Trinta corpos-de-prova foram confeccionados, com duas camadas de cerâmica opaca e de corpo, e os testes realizados em máquina universal de ensaios (0,5 mm/min). As médias de resistência de união (em MPa) foram: 28,21 (Ceramco), 28,96 (Noritake) e 24,11 (Vita VMK-68). A análise de variância a um critério não demonstrou diferença estatisticamente significante entre os materiais (p>0,05). Os resultados demonstraram que todas as cerâmicas foram compatíveis com a liga avaliada.

Dentists and technicians have used dental ceramics associated with different types of alloys without taking into account the characteristics of compatibility of these materials. Knowing the properties of the alloy and ceramic used in metal/ceramic restorations is a key factor for treatment success. The purpose of this study was to evaluate the bond strength of a palladium-silver alloy (Pors-on 4) to 3 ceramics (Ceramco, Noritake and Vita VMK-68) using shear forces at the metal-ceramic interface. A stainless steel cylindrical matrix was used for preparation of the metal dies, application of ceramic and shear strength testing. Thirty palladium-silver alloy cylinders received two layers of opaque and two layers of body porcelain, and shear tests were performed in a universal testing machine at a cross-head speed of 0.5 mm/min. Shear bond strength means (in MPa) were: 28.21(Ceramco), 28.96 (Noritake) and 24.11 (Vita VMK-68). One-way ANOVA did not show statistically significant differences (p>0.05) among the materials. The results of this study indicate that the three evaluated ceramic systems are suitable to be used in combination with the tested palladium-silver alloy.